Mechanical Engineering
 

Ashley Emery - Professor

Quick Links
Back to Ashley Emery

Journal Papers and Book Chapters

Ductile Crack Bifurcation and Arrest in Pressurized Pipes, (with W. J. Love, W. H. Chao, O. Johansson, and A. S. Kobayashi), ASTM STP, 1989

Heat Transfer in Thin Silicon Film Melting by Laser Line Sources, (with C. Grigoropoulos, E. P. Wipf) , International Journal of Heat and Mass Transfer, Vol. 33, No.5, pp. 797-803, 1990

A Finite Element Algorithm for Modelling Crack Tip Behavior in Viscoelastic Materials, (with P. Krishnaswamy, M. Tuttle, and J. Ahmad) International Journal for Numerical Methods in Engineering, pp. 371-387, 1990

Invited Chapter, Thermal Science for Physical Medicine, (with K. M. Sekins), Therapeutic Heat and Cold, 4th edit, J. F. Lehmann, ed., Williams and Wilkins, 1990

Invited Chapter, Computer Modeling of ThermoTherapy, (with K. M. Sekins), Therapeutic Heat and Cold, 4th edit, J. F. Lehmann, ed., Williams and Wilkins, 1990

A Comparative Study of Methods for Computing the Diffuse Radiation ViewFactors for Complex Structures, (with O. Johansson, M. Lobo, and A. Abrous), ASME Journal of Heat Transfer, pp. 413-422, Vol. 113, No. 2, May 1991

Experimental and Computational Analysis of Laser Melting of Thin Silicon Films, (with C. P. Grigoropoulos and W. E. Dutcher), ASME Journal of Heat Transfer, pp. 21-30, February 1991

The Use of Combined Reflective and Normal HFTs in Determining Convective Heat Transfer Coefficients and Room Thermal Radiative Balance, Proc. In-situ Heat Flux Measurements in Buildings, ed. S. N. Flanders, pp. 97-110, February 1991

On the Extensive Use of Heat Flux Transducers for Evaluating Residential Building Component Performance, (with C. J. Kippenhan, G. B. Varey, J. L. Garbini, J. H. Heerwagen and D. R. Heerwagen ), Proc. In-situ Heat Flux Measurements in Buildings, ed. S. N. Flanders, pp. 143-158, February 1991

Numerical Modeling of Full Scale Pipe Rupture Tests, (with Y. H. Chao, A. S. Kobayashi and W. J. Love), ASME Journal of Pressure Vessel Technology, Vol. 114, No. 3, pp. 265-270, 1992

A Contact Thermal Shock Test of Ceramics Utilizing an Acoustic Emission Technique, (with Rogers, W. C.), accepted for publication in the ASME Journal of Materials Science, 1992

An Analytical and Experimental Study of the Effect of Welding Parameters on Fusion Welds, (with Jones, B. K. and Marburger, S. J.), Welding Journal, Vol. 72, No 2, pp. 51s-59s, February 1993

Design and Analysis of a Test Coupon for Fusion Welding, (with B. K. Jones and S. J. Marburger), ASME Journal of Pressure Vessel Technology, Vol. 115, No 1, pp. 38-46, February 1993

The Discrete Maximum Principle in Finite Element Thermal Radiation Analysis, (with M. Lobo), Numerical Heat Transfer, Part B, Vol. 24, No 2, pp. 209-228, September 1993

Invited Paper, Current Trends in Heat Transfer Computations, (with D. W. Pepper and R. J. Cochran), Journal of Thermophysics and Heat Transfer, Vol. 7, No 2, pp. 193-212, April 1993

Finite Element Modeling of the Time Dependent Behavior of Nonlinear Ductile Polymers, (with P. Krishnaswamy, M. Tuttle, J. Ahmad), Polymer Engineering and Science, 1993

Invited Paper, Supercomputing in Heat Transfer, (with D. W. Pepper), Annual Review of Heat Transfer, C. L. Tien, ed., CRC Press, February 1994

Analysis of Explosively Actuated Valves, (with B. K. Jones, M. F. Hardwick and R. Ng), ASME Journal of Mechanical Design, Vol. 116, pp. 809-816, 1994

Transient Effects of Uncertainties on the Sensitivities of Temperatures and Heat Fluxes using Stochastic Finite Elements, (with T. D. Fadale), ASME Journal of Heat Transfer, Vol. 116, pp. 808-814, 1994

Multigrid Computation of Natural Convection in Enclosures with a Conductive Baffle, (with Y. S. Sun), Numerical Heat Transfer, Part A: Applications, pp. 575-592, 1994

Cost-optimal Analysis of Cooling Towers, (with Kintner-Meyer, M.), ASHRAE Transactions, v 100, n 2, pp. 92-100

Design and Analysis of Explosively Actuated Valves: The Interaction of the Plunger and the Housing, (with S. Deckers and B. K. Jones), ASME Journal of Mechanical Design, Vol. 117, pp. 215-220, 1995

Two Approaches to Optimal Sensor Location, (with T. D. Fadale, and A. V. Nenarokomov), ASME Journal Heat Transfer, Vol. 117, pp. 373-379, 1995

The Non-Linear Viscoelastic-Viscoplastic Behavior of IM7/5260, (with M. E. Tuttle and A. Pasricha), Journal of Composite Materials, Vol. 29, No. 15, pp. 2025-2046, 1995

Cost Optimal Design of Cooling Towers, (with M. Kinter-Meyer), ASHRAE Journal, Vol. 37, pp. 46-55, April 1995

Cost optimal analysis and load shifting potentials of cold storage equipment, (with Kintner-Meyer, M.), ASHRAE Transactions, Vol. 101, Pt.2, pp. 39-548

Optimal Control of an HVAC System using Cold Storage and Building Thermal Capacitance, (with M. Kintner-Meyer), Energy and Buildings, Vol. 23, No. 3, pp. 19-31, Elsevier Science S.A., 1995

Time Dependent Behavior of IM7/5260 Composites Subjected to Cyclic Thermomechanical Loading, (with M. Tuttle, A. Pasricha), Composites Science and Technology, Vol. 55, pp. 49-56, 1995

The Use of the Discrete Maximum Principle in Finite Element Analysis of Combined Conduction and Radiation in Non-Participating Media, (with M. Lobo), Numerical Heat Transfer, Part B: Fundamentals, Vol. 27, pp. 447-465, 1995

Uncertainties in parameter estimation: The inverse problem, (with Fadale, T. D. and Nenarokomov, A.V.), International Journal of Heat and Mass Transfer, Vol. 38, No. 3, pp. 511-518

Design of Experiments Using Uncertainty Information, (with T. D. Fadale), ASME Journal of Heat Transfer, Vol. 118, No. 3, pp. 532-538, Aug. 1996

Uncertainties in Parameter Estimation, The Inverse Problem, (with T. Fadale and A. Nenarokomov), International Journal of Heat and Mass Transfer

Mass Loss and Residual Stiffness and Strength of IM7/5260 Composites Subjected to Elevated Loads and Temperatures, (with M. E. Tuttle and A. Delaney), Composites Science and Technology

Design and Analysis of Explosively Actuated Valves: The Interaction of the Plunger and the Housing, (with Deckers, S. and Jones, B. K.), ASME Journal of Mechanical Design, Vol. 117, No. 2A, pp. 215-220

Two Approaches to Optimal Sensor Locations, (with Fadale, T. D. and Nenarokomov, A. V.), ASME Journal of Heat Transfer, Vol. 117, No. 2), pp. 373-9

Time-dependent Response of IM7/5260 Composites Subjected to Cyclic Thermo-mechanical Loading, (with Pasricha, A. and Tuttle, M. E.), Composites Science and Technology, Vol. 56, No. 1, pp. 55-62

Transient Thermoelastic Fracture of Brittle Substrates Bonded to Brittle Films, (with J. Malgalhaes), Journal of Thermal Stresses, Vol. 20, pp. 35-45, Jan 1997

Handling Temperature Dependent Properties and Boundary Conditions in Stochastic Finite Element Analysis, (with T. D. Fadale), Numerical Heat Transfer, Part B: Fundamentals Vol. 31, pp. 37-51, Jan 1997

Effects of Wall Conduction, Internal Heat Sources and an Internal Baffle on Natural Convection Heat Transfer in a Rectangular Enclosure, (with Y. S. Sun), International Journal of Heat and Mass Transfer, Vol. 40, pp. 915-929, Mar 1997

Accuracy in Modeling the Acoustic Wave Equation with Chebyshev Spectral Finite Elements, (with W. Dauksher), Finite Elements in Analysis and Design, Vol. 26, No. 2, pp. 115-128, June 1997

The Effect of Imprecisions in Sensor Location and Boundary Conditions on Optimal Sensor Location and Experimental Accuracy, (with T. Fadale), ASME Journal of Heat Transfer, Vol. 119, No. 4, pp. 661-665, Nov. 1997

Invited Paper, Optimal Experiment Design (with A. Nenarokomov), Measurement Sciences and Technology, Vol. 9, pp. 864-876, May 1998

Invited Chapter, The Effect of Correlations and Uncertain Parameters in the Efficiency of Estimating and The Precision of Estimated Parameters, Inverse Engineering Handbook, CRC Press, 2003

The Effects of Property Variation on Natural Convection in an Enclosure, (with J. W. Lee), ASME Journal of Heat Transfer, Vol. 121, No. 1, pp. 57-62, February 1999

Calculating Sensitivities of Thermal Systems with Uncertain Properties using the Stochastic Finite Element Method and Finite Differencing, (with T. D. Fadale), Inverse Problems in Engineering, Vol. 7, pp. 291-307, 1999

Invited Lecture, Optimal Experimental Design, presented at the ASME IMECE, Nashville TN, Nov. 1999

An Evaluation of the Cost Effectiveness of Chebyshev Spectral and p-Finite Element Solutions to the Scalar Wave Equation, Int. Journal of Numer. Meth. Engng., Vol. 45, pp. 1099-1113, 1999

Estimating Contact Resistance of Electronic Chips by Surface Temperature Measurements, Proc. SECTAM XX, Calloway Gardens, GA, April, 2000

Uncertainties in Parameter Estimation: The Optimal Experiment, (with T.D. Fadale and A. Nenarokomov), International Journal of Heat and Mass Transfer, Vol. 43, No. 18, pp. 3331-9, 2000

The solution of elastostatic and elastodynamic problems with Chebyshev spectral finite elements, (with Dauksher, W.), Computer Methods in Applied Mechanics and Engineering, Vol. 188, No.1-3, pp. 217-33

Thermal Performance of a Residential Basement, Presented at the 2000 ASME IMECE, Fla, November, 2000 and submitted to the ASHRAE Journal

3rd Order Stochastic Analysis of Stochastic Thermal Systems with Correlated Uncertain Properties, ASME Journal of Heat Transfer Vol. 123, pp. 390-399, 2001

Using the Concept of Information to Optimally Design Experiments with Uncertain Parameters, ASME Journal of Heat Transfer, Vol. 123, No. 3, June 2001, pp. 593-600

Stochastic Regularization, Inverse Problems in Engineering, Vol. 9, No. 2, 2001, pp. 109-126

Computing Temperature Variabilities due to Stochastic and Fuzzy Thermal Properties, Inverse Problems in Engineering, Vol. 9, No. 2, 2001, pp. 141-156

Invited Plenary Lecture, Parameter Estimation in the Presence of Uncertain Parameters and with Correlated Data Errors, Proc. EuroTherm 68, Inverse Problems and Experimental Design

Experimental and Numerical Investigation of Polymer Preform Heating, (with H. M. Reeve and A. M. Mescher), Journal of Materials Processing and Manufacturing Science, Vol. 9, 2001, pp. 285-301

Invited Paper, An Overview of Stochastic Systems, Proc. ICES'02 - International Conference on Computational Engineering and Sciences, Puerto Vallarta, Mexico

Parameter Estimation in the presence of uncertain parameters and with correlated data errors, Int. Journal of Thermal Sciences, Vol. 41, pp. 481-491

Free Convection from a Horizontal Cylinder in a Non-Laboratory Environment, 1st International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, April 2002, Kruger Park, South Africa

Transient and Steady State Free Convection from a Horizontal Cylinder, Proc. 4th International Conference on Inverse Problems in Engineering, June, 2002, Rio de Janeiro, Brazil

Designing Optimal Heat Transfer Experiments, Proc. 12th International Heat and Mass Transfer Conf., July 2002, Grenoble, France

Higher Order Perturbation Analysis of Stochastic Thermal Systems with Correlated Uncertain Properties, ASME Journal of Heat Transfer, Vol. 123, No. 2, pp. 390-399

The relationship between information, sampling rates, and parameter estimation models, (with Blackwell, B. F. and Dowding, K. J.), ASME Journal of Heat Transfer, Vol. 124, No. 6, pp. 1192-9

Invited Paper, Solving Stochastic Heat Transfer Problems, Boundary Elements, to appear, 2003

Estimating and Refining Thermal Models by using the Extended Kalman Filter Approach, submitted to the ASME Journal of Heat Transfer, February, 2003